Advertisement
1. LIST OF ERROR DISPLAY
Errors and warnings are displayed by the following ways:
- Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution
are displayed on the LCD in text and by icon.
- Messages during printing from a computer are displayed on the MP driver Status Monitor.
- Error codes (the latest 10 error codes at the maximum) are printed in the "operator call/service
call error record" area in EEPROM information print.
Buttons valid when an operator call error occurs:
- ON button:
To turn the machine off and on again.
- OK button:
To clear and recover from an error. In some operator call errors, the error will
automatically be cleared when the cause of the error is eliminated, and pressing
the OK button may not be necessary.
- Stop button: To cancel the job at error occurrence, and to clear the error.
1-1. Operator Call Errors (Alarm LED Lit In Orange)
Error
Error
code
No paper in the rear
[1000] --- Rear tray.
tray.
No paper in the
[1003] --- Cassette.
cassette.
Paper jam.
[1300] ---
Paper jam in the rear
[1303] ---
guide.
Ink may have run
[1600] U041 The following ink may have
out.
Ink tank not installed. [1660] U043 The following ink tank cannot
Print head not
[1401]
installed, or not
properly installed.
Faulty print head ID.
Print head
[1403]
temperature sensor
error.
Faulty EEPROM data
[1405]
of the print head.
Multiple ink tanks of
[1681] U071 More than one ink tank of the
the same color
installed.
Ink tank in a wrong
[1680] U072 Some ink tanks are not
position.
U No.
Message on the LCD
There is no paper. Load
paper and press [OK].
There is no paper. Load
paper and press [OK].
The paper is jammed. Clear
the paper and press [OK].
run out. Replacing the ink
tank is recommended.
be recognized.
(Applicable ink tank icon)
U051 Print head is not installed.
Install the print head.
U052 The type of print head is
incorrect. Install the correct
print head.
following color is installed.
installed in place.
(2/58)
Solution
Confirm that the rear tray is selected as
the paper source. Set the paper in the
rear tray, and press the OK button.
Confirm that the cassette is selected as
the paper source. Set the paper in the
cassette, and press the OK button.
Note:
Only plain paper can feed from
the cassette.
Remove the jammed paper, and press
the OK button.
Replace the applicable ink tank, or press
the OK button to clear the error without
ink tank replacement. When the error is
cleared by pressing the OK button, ink
may run out during printing.
Install the applicable ink tank(s) properly,
and confirm that the LED's of all the ink
tanks light red.
Install the print head properly.
Re-set the print head. If the error is not
cleared, the print head may be defective.
Replace the print head.
Replace the wrong ink tank(s) with the
correct one(s).
Install the ink tank(s) in the correct
position.
Advertisement
