Graphics Driver Installation - SOLTEK SL-75MRN Series Manual

3-6 Graphics Driver Installation

Following the installation of DirectX, you have to restart system so that
your system can be reconfigured with the utility. When restarting pro-
cedures finish, please open the Support CD with your CD-ROM to en-
ter the Main Installation Menu.
1. For installation of on-board VGA driver, you must first connect the
monitor to the on-board VGA connector. Then click to "Graphics
Driver" on the Main Menu. The Graphics Driver is specifically for on-
board VGA.
2. When the following screen appears, please press "Next" button to
continue.
3. After all the setup procedures have completed, click to "Finish" button
to exit the Installation program and re-start your system.
Chapter 3 Software Setup
kÉñí
cáåáëÜ
49