Table of Contents
Advertisement
3-4 To Verify 6-channel Audio
After installation of AC'97 6-channel Codec, you must configure the 5.1
Speaker connection to enable the 6-channel audio.
1. Connect your on-board Audio Connector to your 6-channel speakers
as depicted in the figure below:
Pale Green Connector
to Front Speaker
2. After Connection is done, start your Windows system and double
click the Avance Sound Effect Manager icon to enter 6-channel
configuration:
Pale Pink Connector to
Center/Subwoofer Speaker
Pale Blue Connector
to Rear Speaker
45
Chapter 3 Software Setup
Double click
Sound manager
Advertisement
Table of Contents
