Cleaning And Maintenance; Specifications - Bresser BR SL Series Instruction Manual

1. Shortly press the ON/OFF button to
activate the remote control.
2. Long press the MENU button until the
green light is on, which goes to the
mode of special effect lighting control.
3. Shortly press MENU button to switch
to brightness, flash mode or flash
speed in loop. When you switch to
flash mode, the red and orange
indicators are both off. Press [+] and
[–] button to choose from F1 to F6
flash type settings.
F1: Paparazzi; F2: Fireworks;
F3: Bad bulbs; F4: Lightning;
F5: TV; F6: SOS
LIGHT INTENSITY IN F1-F6 MODE
1. Shortly press MENU button.
2. When both, red and green indicator
are on, shortly press [+] or [–] button
to set the ligght intensity.
FLASH SPEED
1. Shortly press MENU button.
2. When both, orange and red indicator
are on, shortly press [+] or [–] button
to set the flash speed.
CLEANING &
MAINTENANCE
• Only use a dry cloth to clean the exterior
of the device. To avoid damaging the
electronics, do not use any cleaning
fluid.
• Only use the recommended batteries.
Always replace
batteries with a new, complete set of
batteries at full capacity. Do not use
batteries from different brands or
with different capacities.
STORAGE
• Remove the batteries from the unit if it
is not used for a longer time.
• Protect the device from dust and
moisture and store it in a dry
environment.
weak or empty

SPECIFICATIONS

Model
Wireless frequency
Transmission range
Channels
Standby time
Dimensions (LxWxH)
Weight
Operating temperature
Power supply
RC-01C
2.4G wireless remote control
2.4 GHz
up to 50 m (16.4 ft)
up to 99
> 1 year
85 x 45 x 55 mm
50 g (without batteries)
-10° to 50° C
2 pcs. 1.5V AAA/LR03
GB