General Safety Information - Bresser BR SL Series Instruction Manual

IMPRINT
Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
www.bresser.de
Errors and technical changes reserved.
© 2023 Bresser GmbH
All rights reserved.
VALIDITY NOTE
This documentation is valid for the
products with the following article
numbers:
F004543, F004544, F004545, F004546
Manual version: 0323
Delivery part: Remote control
For any inquiries, please state these
information.
MAIN FEATURES
• 2.4G wireless remote control
• Connect up to 99 BR-SL LED lights at
the same time
• Set and control brightness, light
intensity, color temperature and
special light effects
• Colored function lights
• Easy to use
*only when used with compatible bicolor lights
GENERAL SAFETY
INFORMATION
RISK OF MATERIAL DAMAGE!
The manufacturer accepts no liability for
damage to property caused by improper
or insufficiently safe installation!
Only use the recommended batteries for
power supply!
Do not touch the device with wet or
damp body parts.
IMPORTANT NOTE!
Do not disassemble the device! In the
event of a defect, please contact your
dealer. They will contact the Service
Center and can arrange the return of
this device for repair if necessary.
DELIVERY CONTENT
Remote control (A)
Additionally needed (not included):
2 pcs. AAA/LR03 type batteries
PARTS LIST
(FIG. 2)
(1) Function lights
(left/red, centre/orange, right/
green)
(2) Display (2-digits), shows the values
for brightness, colour temperature
and channel
(3) ON/OFF button
(4) [+] button
(5) MENU button
(6) Battery compartment and cover
(on backside)
(7) [-] button
FUNCTION LIGHTS
• Red/left: brightness setting
• Orange/centre: color temperature
setting*
• Green/right: special light effects
activated
• no color: channel setting
(FIG. 1)