Setting Procedures For Printing - Epson Stylus Photo R3000 User Manual

Epson Stylus Photo R3000
Depending on the media type, the print quality may
decline or borderless printing cannot be selected.
"Epson Special Media Table" on page 108
U

Setting Procedures for Printing

Making Settings in Windows
A
When the printer driver's Main screen is
displayed, you can configure various settings
required for printing such as Media Type,
Source, Size.
"Basic Printing Methods (Windows)" on
U
page 30
User's Guide
Printing Varieties
B
Select Borderless, and then click Expansion.
You can not choose the expansion amount when
Roll Paper or Roll Paper (Banner) is selected for
Source.
C
Select Auto Expand or Retain Size as the
Method of Enlargement. If you select Auto
Expand, set how much of the image goes beyond
the edge of the paper as shown below.
Max
Mid
Min
59
Sizes larger than A4:
Approximately 3 mm past the top,
4.5 mm past the bottom, and 3.5 mm
past the left and right edges
A4 or smaller (excluding 100 × 148
mm, 9 × 13 cm/3.5 × 5 in., 10 × 15
cm/4 × 6 in.):
Approximately 3 mm past the top, 4
mm past the bottom, and 2.5 mm
past the left and right edges
100 × 148 mm, 9 × 13 cm/3.5 × 5 in.,
10 × 15 cm/4 × 6 in.:
Approximately 1.3 mm past the top,
2.5 mm past the bottom, and 2.5 mm
past the left and right edges
½ of Max
¼ of Max