Table of Contents
Advertisement
Product overview, functions
2.5 LEDs
2.4.2
Project engineering
Configuration
To configure the CP, the following configuration tool is required:
STEP 7 version
STEP 7 Professional V16
STEP 7 Professional V17
STEP 7 Professional V18
Downloading the configuration data
When the configuration data is downloaded to the CPU, the CP is supplied with the relevant
configuration data. The configuration data can be downloaded to the CPU via PROFIBUS or
any PROFINET interface of the S7-1500 station.
2.4.3
Program blocks
For the use of the program blocks for the CP, STEP 7 in the following version is required:
STEP 7 version
STEP 7 Professional V17
STEP 7 Professional V18
2.5
LEDs
The status and error displays of the CP 1542-5 are described below.
You can find additional information on "Interrupts" in the STEP 7 online help.
You can find additional information on "Diagnostics" and "System alarms" in the System
diagnostics (https://support.industry.siemens.com/cs/ww/en/view/59192926) function
manual.
16
CP (6GK7542-5FX00-0XE0)
The functionality of the CP with
firmware version V2.0.4 can be
configured.
The functionality of the CP with
firmware version V2.0.5 can be
configured.
The functionality of the CP with
firmware version V2.0.5 can be
configured.
CP (6GK7542-5FX00-0XE0)
Using the program blocks for the
CP with firmware version V2.0.5
Using the program blocks for the
CP with firmware version V2.0.5
Equipment Manual, 01/2023, C79000-G8976-C326-05
CP (6GK7542-5FX10-0XE0)
The CP is configurable, but with the
functionality of the CP (6GK7542-
5FX00-0XE0) with firmware
version V2.0.4.
The CP is configurable, but with the
functionality of the CP (6GK7542-
5FX00-0XE0) with firmware
version V2.0.5.
The functionality of the CP with
firmware version V3.0 can be
configured.
CP (6GK7542-5FX10-0XE0)
Using the program blocks for the
CP (6GK7542-5FX00-0XE0) with
firmware version V2.0.5
Using the program blocks for the
CP with firmware version V3.0
SIMATIC CP 1542-5
Advertisement
Table of Contents
