Remote Mount - Emerson Rosemount 775THUM Reference Manual

Mounting
January 2023
2. Connect the THUM Adapter to the HART wired device using the
3. Close the housing cover on the HART wired device, so that metal touches metal, but
3.3

Remote mount

Prerequisites
Install the HART device according to standard installation practices and the manufacturer's
instructions. Use an approved thread sealant on all connections.
Procedure
1. The THUM Adapter should be mounted as shown in
16
Figure 3-1: Direct Mount
do not overtighten to prevent damaging the unit.
Note
Two splice connectors are included with the THUM Adapter. The first is a two
connection splice. The second is a three connection splice for use with a resistor,
if there is not enough resistance in the loop. Both of these splice connectors can
accept 14 to 22 gauge wire. See wired device reference manual for information on
the required loop resistance.
Reference Manual
00809-0100-4075
Wiring diagrams.
Figure 3-2.
Emerson.com/Rosemount