Related Manuals for Bretford Explorer ETCM-SB
Summary of Contents for Bretford Explorer ETCM-SB
- Page 1 Explorer TV Cart ETCM-SB Assembly Instructions ETCMHD-SB Included ETCMHD-SB will also include: 031-11241 Rev .B – 12.08.22...
-
Page 2: Assembly Steps
Assembly Steps: 1. Unbox and Remove Packaging Cut off straps and Remove TV Mount & center Lift the outer wrap up and off remove top tray internal supports Slide the Handle up and out Remove remaining support pieces (for model ETCMHD-SB) Slide the Upright up and out Unfold end flap on bottom tray and roll Base off pallet... - Page 3 2. Attach Upright to Base Hardware: 030-2302 (x4) – Hex Head Screws 030-2303 (x4) – Lock Washers 010-8837 (x1) – Hex Wrench Install the Upright on the Base by Push the “ON” tab down on the two sliding it onto the two posts. locking casters so frame does not move.
- Page 4 3. Install TV Mount to Upright NOTE: It is recommended that 75”+ Hardware: monitors go on the lower holes to 030-2322 (x4) – Carriage Bolts 030-2323 (x4) – Lock Nuts prevent hitting the top of the doorway 010-8837 (x1) – Hex Wrench Line up bottom of TV Mount with Attach with Carriage Bolts and Nuts, one of the two sets of holes.
- Page 5 Caution: Two person install 4. Mount your TV Caution: Display not to exceed 200 pounds Hardware: M6 or M8 Set Screws (x4) Caution: Ensure caster brakes are locked M6 or M8 Set Screws (x4) M6 or M8 Set Screws (x4) Caution: Do not overtighten set screws Determine the hole size on the back of the TV to be mounted –...
- Page 6 5. Manage the Power Cord Hardware: 030-2249 (x3) – Cable Management Loop 030-2244 (x3) – Push Rivet 031-8122 (x3) – Velcro Strap 1. There is a series of small holes on each side of the frame for locating the cable management loops. Install loops with push rivets. 2.