4. Operation
4.5 Lubrication
1. Lubricate the left knife, middle knife, and right knife of the slide plate once per month
2. The area where the shaft, core, and bearing should be lubricated once every three months.
3. Engine oil should be applied to the gearbox of the decelerator once every two years.
4. While lubricating, don't use excessive amounts of oil as this may cause micro switch failure.
Avoid soaking micro switches with oil.
5. The following parts/components should not be oiled;
a. Strap feed and return roller
b. Electromagnet
c. Electromagnetic brake
4.6 Temperature Adjustment
In the control cabinet, above the circuit board, open the cover plate of the control panel to access the
temperature controls. The temperature is controlled via a potentiometer. When turned clockwise, the
temperature will be increased. By keeping the adjustment between the values of 4 and 5, the strap
adhesion should remain sufficient.
- 10 -