Eagle 100 Operation Manual page 13

4. Operation
4.9 Strap Output Adjustment
In the control cabinet, above the circuit board, open the cover plate of the control panel to access the
strap output control. By turning the potentiometer in a clockwise direction, strap output can be
increased.
4.10 Electromagnetic Brake Adjustment
In the control cabinet, above the circuit board, open the cover plate of the control panel to access the
electromagnetic brake control. By turning the potentiometer in a clockwise direction, the brake can be
adjusted between 0.3mm and 0.5mm. If the setting is too high or low, the electronic brake will not
function properly.
- 13 -