INSTALLATION PREPARATION
PARTS SUPPLIED
PARTS SUPPLIED
160
Before installing your
, please ensure the follow ing parts are included
in the box:
160
•
fishfinder
• Transducer w ith 20' (6m) of cable and mounting hardw are kit
• M ounting system and mounting hardw are kit
• 6' (2m) pow er cable
• Speed/Temperature Sensor and mounting hardw are
• Collector Plug
• Publications kit
If any of these items are missing, call our Customer Support Hotline listed
in the end of this manual.
ACCESSORIES
Techsonic offers a w ide assortment of accessories that complement and
160
expand the capability of your new
. These accessories are designed
w ith the same high standards and are backed by the same one-year
w arranty. All sonar accessories are available through your full-service
dealer or factory direct through our number listed in the Customer Support
section.
INSTALLATION OVERVIEW
160 Series
All
consists of three primary components to install: the control
head, the transducer and the speed/temp sensor.
The control head contains the sonar transmit and receive circuitry, as w ell
as the user controls and display. It should be installed in a location that
provides access to the controls and visibility w hile in use. The control head
mounts on a gimbal mounting system that tilts and sw ivels providing
flexibility for view ing from different locations on the boat. In addition, the
160
can be mounted in the boat console.
2