Teleflex TFX160 Operation Manual page 22

USING THE 160
CONTROL PANELS
and structure is reduced. Selecting a smaller
numeric set t ing narrow s t he band, and
show s great er
composit ion. Select ing " OFF"
White Line feature off.
Note: The W hite Line setting is
retained in memory w hen the 160 is
turned off. The factory setting is
"OFF".
D A
EPTH LARM
alarm. The alarm w ill sound w hen the digital
depth becomes equal to or less than the setting.
The tone sounds at a rapid rate for several
seconds and then sounds intermittently until the boat moves to deeper
w ater. The Depth Alarm can be muted by pressing the C
knob; once muted the alarm w ill not sound again until the boat moves
to w ater greater than the Depth Alarm setting. Remember, depth is
measured from the transducer, not the surface of the w ater.
The Depth Alarm setting is not retained in memory when the
S
allow s the
IM ULATOR
useful for learning the features and functionality
160
of the
operating w ith the simulator on and w ithout a
t ransducer
remember any changes to settings.
The Simulator setting is not retained in memory w hen the
20 20
variat ion
activates a shallow w ater depth
160
to operate in simulated sonar mode. This is
w hen not on the w ater. When
connect ed t he
in bot t om
t urns t he
160
does not
White Line Screen
ONTROL
160
is turned off.
160
is turned off.
P
ANEL