INDRA Smart PRO User Manual
Hide thumbs
Also See for Smart PRO:
- Installation manual (54 pages) ,
- User manual (11 pages) ,
- Installation manual (38 pages)
Related Manuals for INDRA Smart PRO
Summary of Contents for INDRA Smart PRO
- Page 1 Indra Smart PRO User Guide Be at the forefront of EV charging with Indra’s pioneering technology...
-
Page 2: Important Safety Notes
WARNING: Use the Smart PRO only as directed. WARNING: Do not use the Smart PRO if it is defective, appears broken, cracked or fails to operate or is otherwise damaged. In this case, you must report the damage immediately to your original installation partner, quoting the serial number as shown on the product label. -
Page 4: Specifications
CE Marked and UKCA Standards and regulations The Electric Vehicles (Smart Charge Points) Regulations 2021, BS EN 50581, BS EN 60529, BS EN 61010-1, BS EN 61851-1, IEC 61851-21-2, IEC 61851-22, BS 7671, BS 7671 Amendment 1, G100 Indra Smart PRO User Guide... -
Page 5: Controls And Indicators
Controls and Indicators Primary Status LED Multi-coloured, highlighting the operational state and mode Charging Status Indication Four individual LEDs indicating whether the unit is disconnected from your EV, connected but idle or charging Tethered Charging Cable For tethered variants, a charging cable is attached Charging Connector Holster When not in use, and to prevent water ingress, the charging connector should be pushed into the unit’s holster... - Page 6 This guide covers how to get started with your Smart PRO, explains key features, troubleshooting tips and important safety and warranty information. It is important that you read this guide carefully before using the Smart PRO, so you’re completely familiar with all features and safety advice and are able to get the most from your Smart PRO.
- Page 7 Indra App. Should you experience any difficulties, please contact support@indra.co.uk. Designed to assist you in getting the most out of your Smart PRO, the Indra App is intuitive to use and enables you to manage all the smart charging functionality of your PRO from the palm of your hand.
-
Page 8: Getting Set Up
Getting set up The first time you open the Indra App, you’ll be asked to set up your charger. This should only take a few minutes to complete. We’ll ask you information about yourself, your EV and your electricity supplier and tariff. - Page 9 Info we’ll need about your electricity supplier Telling us about your electricity supplier and your tariff means we can help you charge at the most efficient times for you. By providing your electricity rate, we can not only calculate and show you how much you’re spending, but you can also set the amount of money you want to spend on a charging session (e.g.
- Page 10 • in-app notifications (which pop up while you’re using the app) • emails Notifications you can choose to receive include: • Vehicle plugged in • Charging started • Charging finished • Charging error • Charger error Indra Smart PRO User Guide...
-
Page 11: Default Schedules
Setting up scheduling and smart charging Use the Indra App to set up a regular charging schedule. You can choose regular slots throughout the week and the charger will automatically start charging during those times, as long as your EV is plugged in. - Page 12 • Push the male charging connector into the blank holster recess of the Smart PRO unit, so that it clips/ latches into position and is held. • Ensure that no part of the coiled charging lead is trailing on or close to the ground.
- Page 13 (RCD) consumer unit are correctly set. Primary LED lit, white A solid white LED indicates that the Smart PRO is set up and ready to go. The charger is now in smart mode and will charge based on the schedule set up in the Indra App.
- Page 14 Primary LED lit or flashing, red The Smart PRO has encountered an error or a fault. Reset the charger by turning the rotary isolator switch to the ‘off’ position, or by resetting the main power switch in your (RCD) consumer unit. If the red light persists, then contact Customer Support.
- Page 15 LEDs relating to the primary LED light: 4 panel LEDs are off If the four panel LEDs below the primary LED are off, then the Smart PRO is not connected to the EV. 4 panel LEDs are lit With the four panel LEDs illuminated, the Smart PRO is connected to the EV and is currently in ‘idle’...
- Page 16 Leave us a Trustpilot review: Contact us For more information, please contact us; Online support Email us Call us: www.indra.co.uk/ support@indra.co.uk (+44) 01684 770 631 support...