Hyundai HHA162206 User Manual page 5

STEP 2 - BACK OF THE HEAD
Changed to the next longest comb attachment 9mm or 12mm(#3 or #4) and cut the back of the
head (see diagram 2).
STEP 3 - SIDE OF THE HEAD
Change to one of the shorter combs 3mm or 6mm, trim sideburns,i.e. the hair directly in front of
the ears. Then change to one of the longer combs, 9mm or 12mm, and continue to cut to the top
to the head (see diagram 3).
STEP 4 - TOP OF THE HEAD
1. Using comb attachment 9mm or 12mm cut top of head form back to front against the
direction in which the hair normally grows (see diagram4). In some cases, this may require the
reverse or cutting from front to back.
2. Comb attachments 3mm or 6mm are used to achieve a close crew cut or short cut.
3. For longer hair on top. use the comb provided and lift hair on the top of the head. Cut over
the comb with the hair lifted or hold the hair between the fingers to lift it and cut it to desired
length (see diagrams 5 and 6). Always work from the back of the head. You can cut the hair
shorter gradually by reducing the space between the comb/fingers and the head. Comb out
trimmed hair and check for uneven strands.
Diagram 4
Diagram 2
Diagram 3
Diagram 5 Diagram 6