Samsung AC TXAD C Series Installation Manual page 26

Installation Procedure
7 Setting outdoor unit option switch and address
manually
a Setting the option
• Press and hold K2 to enter the option setting.
(Only available when the operation is stopped)
– If you enter the option setting, display will
show the following.
– Seg 1 and Seg 2 will display the number for
selected option.
– Seg 3 and Seg 4 will display the number for set
value of the selected option.
• If you have selected desired option, you can
shortly press the K2 switch to adjust the value of
the Seg 3, Seg 4 and change the function for the
selected option.
Example)
• If you have selected desired option, you can
shortly press the K2 switch to adjust the value of
the Seg 3, Seg 4 and change the function for the
selected option.
Example)
26
English
• After selecting the function for options, press and
hold the K2 switch for 2 seconds. Edited value of
the option will be saved when entire segments
blinks and tracking mode begins.
Option Input
SEG1 SEG2 SEG3 SEG4
item unit
Channel
Main 0
address
Snow
accumulation
Main 0
prevention
control
Step for
Main 0
Silence mode
Type of
Silence Main 0
mode
CAUTION
• Edited option will not be saved if you do not end the
option setting as explained in above instruction.
While you are setting the option, you may press and
hold the K1 button to reset the value to previous
setting.
If you want to restore the setting to factory default,
press and hold the K4 button while you are in the
option setting mode.
– If you press and hold the K4 button, setting will be
restored to factory default but it doesn't mean that
restored setting is saved. Press and hold the K2
button. When the segments shows that tracking
mode is in progress, setting will be saved.
Function
Automatic
setting
A U
(Factory
0
default)
Manual
00~15
setting
Disabled
0 0 (Factory
1
default)
0 1 Enabled
Disabled
0 0 (Factory
default)
2
0 1 Step1
0 2 Step2
0 3 Step3
Automatic
Silence mode
0 0
(Factory
3
default)
Manual
0 1
Silence mode