Table of Contents
Advertisement
Selecting functions from the shooting menu
WB — Adjusting the color tone
Color reproduction differs depending on the light conditions. For instance, when
daylight, the setting sun or tungsten lighting are reflected on white paper, the shade of
white produced will be slightly different for each. By setting the WB (white balance),
you can achieve more natural-looking colors.
Select WB in the menu.
Rotate to
select
4
Press to confirm
MENU/OK
Select the white balance.
Rotate to
select
Press to confirm
MENU/OK
Take the picture.
● White balance may not be effective under certain light sources.
● After setting a white balance other than AUTO, play back the image and check
the colors on the monitor.
● When the flash is fired with a white balance setting other than AUTO, colors may
appear different in the resulting image from the colors you see on the monitor.
● White balance is determined automatically by the camera if a situation-related
shooting mode (
68
~
P. 55
P
WB
AUTO
AUTO
0.0
0.0
METERING
AUTO
AUTO
OFF
OFF
DIGITAL ZOOM
OFF
OFF
BACK
EXIT
SELECT
P
WB
AUTO
METERING
DIGITAL ZOOM
BACK
CANCEL
SELECT
Notes on white balance
~
"Playback" (P. 72)
~
P. 42) is selected.
Shutter button
GO
OK
MENU/OK button
The white balance is adjusted
automatically so that colors look natural
irrespective of the light source.
For natural colors under a clear sky.
For natural colors under a cloudy sky.
For natural colors under tungsten
GO
OK
lighting.
For natural colors under fluorescent
lighting.
Control dial
BACK/NEXT
button
Advertisement
Table of Contents
