Table of Contents
Advertisement
Viewing the image files
When the image file has been downloaded to the computer, you can copy the
image to any valid drive or folder on your computer' system, or you can view by
double-clicking. The files will be opened in the default image viewer of the
operating system. If you want to view the image a different size or process it, you
will need to open the image with software that supports JPEG or TIFF images files,
such as Paint Shop Pro, Photoshop or CAMEDIA Master software.
The card access mark on the camera's monitor
blinks while the image is being downloaded. Never
remove the camera from the cradle, or disconnect
the USB cable while the mark is blinking as the
image files may be destroyed.
Macintosh
You can download images from the camera and save them in your computer (in this
case, in the Hard Disk).
Double-click the [untitled] icon displayed
on the desktop when the camera is
connected to the computer.
If you cannot find this icon, or if an error message appears when you
double-click the icon, there may be a problem with one of the following:
T The camera's power source (the AC adapter is not properly connected
T The card (there is no card in the camera or there is a problem with the
T The USB cable (the camera is not properly connected to the computer
Notes on downloading images
or the battery power is low.)
card.)
Check that you can play back images on the monitor of your camera.
by the USB cable.)
Downloading images to your computer
Card access mark
10
183
Advertisement
Table of Contents
