Connecting Up - TAD -D700 Owner's Manual

connecting up

CAutION
' Do not turn on the power switch to the unit or the other components until all connections have been completed.
' When connecting components or changing connections, always set the power switch to OFF and disconnect the power
cord from its AC outlet. When making connections, connect the power cord last.
1. use the supplied DC cords to connect the main unit to the power unit.
2. Connect other components.
3. Connect the supplied power cord to the unit's AC IN connector.
4. Connect the power cord to a standard electrical outlet (uSA: AC 120 V; Europe: AC 220 - 240 V).
Power unit
Power cord
(supplied)
ON
POWER
OFF
To AC
Power outlet
OUTPUT
(COAXIAL)
Select one of these connection methods.
2
digital output connector
(D/A converter, etc.)
When connecting the DC cable,
press the cable's DC plug into the
connector firmly, then rotate the
locking ring to secure the
connection.
DC cords (supplied)
1
Main unit
DC2 DC OUTPUT DC1
AC IN
Coaxial cable
(commercially
3
available)
OUTPUT
(BALANCED)
Component with
DIGITAL INPUT
COAXIAL XLR
D2 D1
2 1
3
DC2 DC INPUT DC1
COAXIAL XLR
DIGITAL OUTPUT
XLR balanced
cable
(commercially
available)
OUTPUT OUTPUT
(COAXIAL) (BALANCED)
Component with
digital input connector
1
2
RCA cable
(commercially
available)
ANALOG OUTPUT
R L
UNBALANCED
R L
BALANCED
R
L R L
INPUT INPUT
(BALANCED) (UNBALANCED)
Select one of these connection methods.
Pre-Amplifier
TAD-D700 15