Table of Contents
Advertisement
Quick Links
BigSexy
Installation Instructions
ShowerLite LED Back-lit, Fog-free
Shower Mirrors
Model 16105-306024M and Large Custom Sizes w/LED
June 2022
The Big Sexy is UL/C-UL listed for use in the shower and tested to CSA standards.
This unit is designed to be powered by a switched outlet and activated when the bathroom
light or fan is switched on.
IMPORTANT INSTRUCTIONS
Only wire the BigSexy Shower ClearMirror to the 24-volt in-line and 24-volt DC direct plug-in
power supplies included with this product. Install in accordance with all applicable safety,
national and local electrical codes.
Read all instructions before using the Shower ClearMirror.
Advertisement
Table of Contents
Related Manuals for ClearMirror BigSexy 16105-306024M
Summary of Contents for ClearMirror BigSexy 16105-306024M
- Page 1 IMPORTANT INSTRUCTIONS Only wire the BigSexy Shower ClearMirror to the 24-volt in-line and 24-volt DC direct plug-in power supplies included with this product. Install in accordance with all applicable safety, national and local electrical codes.
- Page 2 • SAVE THESE INSTRUCTIONS. Installation Activate the Big Sexy ClearMirror by a switch. You may decide to connect it to another light or fan to ensure it is turned off when not in use. 1. Before installing wall tile, measure for desired mirror height from the finished shower floor.
- Page 3 WARNING: This stage requires a qualified electrician and conformance with both the National Electrical Code and local building codes. Turn off the power to the circuit connected to the light fixture at the disconnect means. Failure to do so could result in death or serious injury. Wiring the Heaters Observe electrical load requirements.
- Page 4 WARNING: This stage requires a qualified electrician and conformance with both the National Electrical Code and local building codes. Turn off the power to the circuit connected to the light fixture at the disconnect means. Failure to do so could result in death or serious injury. Wiring the LED The ShowerLite uses a custom power breakout board to receive power and connect LED(s).
- Page 5 To prevent damage to the mirror backing, use Gunther Premier Plus Mirror Mastic or Kerdi Fix. Available from your local mirror/glass/tile shop or online through Amazon or CR Laurence. Other mirror mastics will work but these are recommended. See ClearMirror.com/FAQ...
- Page 6 OPERATING INSTRUCTIONS • The ClearMirror assembly must be properly installed before it is used. • The ClearMirror is to be installed flush with the tile with wiring fed from behind the full, wall- mounted assembly. • Be certain that the controls are operational per the instructions in that the bathroom light, ceiling fan or alternate switch power on and power off the ClearMirror.
- Page 7 WARRANTY INFORMATION NewHome Bath & Mirror, Inc. DBA ClearMirror and its affiliates will not warranty the labor or material costs for installation, replacement or use of ShowerLite when operated in an application that is lower than 50° F.
Need help?
Do you have a question about the BigSexy 16105-306024M and is the answer not in the manual?
Questions and answers