Infineon WLC1150 User Manual page 25

WLC1150 MP-A2 50-W wireless power transmitter
(REF_WLC_TX50W_N1) user guide
Reference board operation
Figure 18 Successful download of configuration file
Dismantle the hardware setup.
j)
3. Debug log capture setup.
Do the following connections using jumper wires to establish a serial connection between the
a)
REF_WLC_TX50W_N1
o Connect a jumper wire between the UART_Tx pin of J5 of the
the Rx pin of the J2 header on the HPI dongle board.
o Connect a jumper wire between the GND pin of J5 of the
GND pin of the J2 header on the HPI dongle board.
Connect
b)
REF_WLC_TX50W_N1
User guide
board and the HPI dongle:
, HPI dongle, and PC as shown in
REF_WLC_TX50W_N1
REF_WLC_TX50W_N1
Figure 19.
25
board and
board and the
002-36393 Rev. *B
2023-02-06