Team Magic 6SETH Manual

Thank you for choosing the Team Magic
The 6SETH 1/8 EP Desert Buggy is designed for easy to drive and uses top quality parts for performance and durability.
Before you start, we suggest you read though the instruction manual first. We hope you have fun and enjoy our product.
General Operation Tips:
Read the instruction manual before operate.
Clear a work area and try to work on a light color towel to avoid missing dropped parts.
Don't over-tighten fasteners. Many assembly problems are caused by over-tightening screws or nuts.
Please driving it slowly and feel the resistance force' s feedback.
When parts doesn't fit, please double check the position or the condition of parts.
Check the instructions when there are any problems. If you cannot figure out what's wrong, please contact dealer, distributor or Team Magic.
Don't use force beyond what the instructions call for.
Using the right tools makes assembly much easier. The instructions below finely indicate you what tools to get to make things easier.
A Good Dealer Is Extremely Important
A good hobby dealer can help you with most problems you might encounter.
This is the main reason why we suggest you buy the products from a good dealer rather than from the cheapest dealer.
Bring your problematic parts to the dealer and, most likely, you'll walk away soon thereafter with the problem solved.
If you think that you really don't have the mechanical skills to solve the problem, you may pay your dealer to finish the job for you.
Thank you for purchasing the 6SETH 1/8 EP Desert
1. Included Tools
Cross Wrench
(17mm)
3. Helpful Equipments
Hobby Knife Body Scissors
#116006
Needlenose Pliers Circlip Plier
#117032
6SETH 1/8 EP Desert Buggy.
Buggy. Before start, you will need to check the following procedures.
2. Required Items
AA Alkaline Batteries
TM Black RC Hex Wrench
Metric Size 1.5mm
#117057-1
TM Black RC Hex Wrench
Metric Size 2.5mm
#117057-3
1/8 EP DESERT BUGGY
14.8v / 22.2v Battery Pack charger
Rechargeable Battery
TM Black RC Hex Wrench
Metric Size 2.0mm
#117057-2
TM Black RC Hex Wrench TM Black HC Nut Driver
Metric Size 3.0mm 5.5mm (for 3mm nut)
#117057-4 #117010
560017R
560017G
1