Deleting A Scenario; Problems And Solutions - LEGRAND In One 770 24 Manual

Deleting a scenario

(on the transmitter)
Press LEARN

Problems and solutions

Problem
The LEARN indicator light switches on
for 5 seconds.
The LEARN indicator light switches on
for 10 seconds.
During the learning phase the LEARN
indicator light does not flash anymore.
The programmed function key does
not work.
When saving the scenario, the LEARN
indicator lights of some receivers
do not switch off.
Press LEARN
and hold for 10 secs
23 23
Cause
Learning is impossible.
The number of recorded transmitters
is more than 32.
The learning mode closes after
10 minutes.
(without any action).
After pressing the LEARN button,
learning of the function key starts
immediately.
Faulty communication between
the products.
24
Product goes back to factory
5 s
settings
Solution
Install compatible products.
Clear the unused scenarios.
Reinitiate the learning phase.
Reinitiate the learning phase.
Check the cabling (connection).
Is there any disturbing device ?
If yes, use an insulating filter.