Table of Contents
Advertisement
M128X, WSM
7. CHECK AND MAINTENANCE
CAUTION
• Be sure to check and service the tractor on a flat place with engine shut off, the parking brake on and chock
the wheels.
[1] DAILY CHECK
To prevent trouble from occurring, it is important to know the condition of the tractor. Check the following items
before starting.
Checking
• Check areas where previous trouble was experienced.
• Walk around the tractor.
1. Check the tire pressure, and check for wear and damage.
2. Check for oil and water leak.
3. Check the engine oil level.
4. Check the transmission fluid level.
5. Check the coolant level.
6. Check the brake oil level.
7. Check the washer liquid level.
8. Check the water separator.
9. Check air cleaner evacuator valve (when used in a dusty place).
10.Check the condition of seat belt.
11.Check and clean the radiator screen, grillm intercooler and oil cooler.
12.Check and clean the air conditioner condenser screen.
13.Check the nuts of the tires are tight.
14.Check the number plate or SMV emblem for damage and replace as necessary if equipped.
15.Care of danger, warning and caution labels.
16.Clean around the exhaust manifold and the muffler of the engine.
• While sitting in the operator's seat.
1. Check the throttle pedal, brake pedals and clutch pedal.
2. Check the throttle lever and shuttle lever.
3. Check the parking brake.
4. Check the steering wheel.
5. Check the seat belt.
• Turning the key switch.
1. Check the performance of the Easy Checker lights.
2. Check head lights, turn signal lights, hazard lights and other light equipment. Clean if necessary.
3. Check the performance of the meters and gauges.
• Starting the engine.
1. Check to see that the lights on the Easy Checker go off.
2. Check the color of the exhaust.
3. Check the brakes for proper operation.
G-14
G GENERAL
KiSC issued 07, 2008 A
Advertisement
Table of Contents
