If The Card Is Not Recognized (Card Check) - Olympus CAMEDIA C-310 Zoom Reference Manual

Power on/off

If the card is not recognized (card check)

When the power is turned on, the camera checks the card automatically.
If there is no card in the camera or a card that is not supported by this camera
is inserted, one of the following screens will be displayed.
• All data stored on the card is erased when the card is formatted.
1
Note
Monitor
indication
NO CARD
24
Corrective action
There is no card in the camera or the card is not
inserted properly.
→ Insert a card. If a card is already inserted, remove it
and insert it again correctly.
The card cannot record, play back or erase pictures.
Replace with a new card, or format the card.
→ Press
to select POWER OFF, and press
. Replace it with a new one.
→ Format the card.
Press to select
to display the confirmation screen. Select YES and
press .
Formatting starts. If the card was successfully
formatted, the camera is ready to take pictures.
FORMAT, and press