Kawai CA401 Owner's Manual page 9

[POWER] button
This button is used to turn the digital piano on/o .
Be sure to turn o the instrument aft f f er playing.
[MASTER VOLUME] slider
This slider controls the master volume level of the
digital piano's built-in speakers or headphones, if
connected.
Display
It shows the function names and setting values.
CHECK
A transparent sheet has been applied to
the display. Remove the transparent sheet
before use.
[1] button
This button is used to select functions shown on
[1].
[2] button
This button is used to select functions shown on
[2].
[REC] button
This button is used to record performances.
[PLAY A A /STOP] button
This button is used to play/stop recorded
performances and Internal Songs such as those
stored in Lesson.
[UP] button
This button is used to move the menu up or
increase the setting values.
[DOWN] button
This button is used to move the menu down or
decrease the setting values.
[METRONOME] button
This button is used to turn the metronome
function on/o and adjust its tempo, time
signature, and volume settings.
[SOUND SELECT] button
This button is used to select sounds.
[PEDAL] connector
This button is used to select sounds.
[USB TO HOST] connector
This port is used to connect the instrument to a
computer using a USB "B to A" A A type cable in order
to send and receive MIDI data.
[DC IN] connector
This jack is used to connect the AC adaptor. r r
[PHONES] jacks
These jacks are used to connect stereo
headphones to the digital piano. Mini stereo plug
and standard stereo plug connectors are provided
for convenience, and both can be used
simultaneously, allowing two pairs of headphones
to be connected at the same time.
Preparation
9