Kawai CA401 Owner's Manual page 42

Appendix
3. Mounting the main body (A) onto
the stand
Lift f f the main body (A) and carefully place it onto
the stand.
Position the main body (A) towards the front of the
stand, so that the metal tting holes are visible
when viewed from above.
Secure the side panels (C) in place. While
supporting the main body (A) with one hand so
that it does not tip and fall, gently slide the main
body (A) backwards until the hooks on the main
body (A) engage with the metal ttings on the side
panels (B and C) and lock into place.
CAUTION
When lift f f ing the main body (A) onto the
stand, be careful not to catch/trap hands
and ngers.
42
4. Fastening the main body (A) to the
stand
Loosely fasten the main body (A) to the stand
using four screws (with washer)
Loosely tighten the screws
main body (A) into position so that the four screws
can be inserted straight. Then, adjust the main
body (A) so that the overhang of the main body (A)
is even on the left f f and right when viewed from the
front.
Tighten the loosely fastened screws
the spring washer is compressed.
CAUTION
Tighten all screws securely to ensure that
the main body (A) is rmly attached to the
stand. It is extremely dangerous if the
main body (A) falls from the stand.
.
, and move the
until