Kawai CA49 Software Update

Software Update
This document contains instructions for updating the system software of the Kawai CA49 digital piano.
Please read these instructions thoroughly before attempting to perform the software update.
 Checking the current software version
While the CA49 digital piano is turned off:
Press and hold the [SOUND SELECT] and [DOWN] buttons
simultaneously, then press the [POWER] button to turn the
instrument on.
The current software version will be shown in the LCD display.
If the version number shown is 1.00, please refer to Stage 1 of
the update instructions. If the version number shown is 1.10 or
higher, please refer to Stage 2 of the update instructions.
* Turn the instrument off and on to return to normal operation.
1

Initial update using the PianoRemote app

This initial update stage is only required if the CA49's current software is version v1.00, and is performed using the
Kawai PianoRemote app for iOS or Android devices.
* If the CA49's current software is version v1.10, this stage can be skipped. Please refer to Stage 2 of the update instructions.
This stage of the update will require approximately 3 minutes to complete.
 Update requirements
This stage of the software update will require an iOS or Android device with internet access, and with Bluetooth enabled.
 Download the PianoRemote app
Scan the relevant QR code below to download the Kawai PianoRemote app onto a iOS or Android device.
PianoRemote app for Android
(CA49)
1.
v1.00
Refer to Stage 1
v1.10 or higher
Refer to Stage 2
PianoRemote app for iOS