Table of Contents
Advertisement
2. Install one ¼" 20 x 1" bolt at each end of the top Sport panel and install two 15" support braces
on the back side of the panel. The support braces bolt to the back of the Sport panel and to the
top flange of the scoreboard using 3/8" x 1 1/2" bolts, flat washers, and nuts.
3. Install the two side Sport panels, support braces, and sheet metal screws.
4. Install the bottom Sport panel, support braces, and sheet metal screws as in Step 3. See
diagrams below.
8
Advertisement
Table of Contents
