Table of Contents
Advertisement
Installation:
1. Place two of the angle brackets on the top outside corners of the scoreboard and attach
with the hardware appropriate bolts and tex screws.
2. Attach the barrels of the bats to the respective sides using the wing nuts attach the base of
the barrels to the angle brackets.
3. Attach the braces on each barrel to the angle brackets and secure them.
4. Attach the angle brackets on the bottom outside corners of the scoreboard the same as you
attached the barrel brackets on the top.
5. Attach the handles of the bats to the respective sides using the wing nuts attach the base
of the handles to the angle brackets.
6. Attach the braces on each handle to the angle bracket and secure.
7. See diagrams below.
10
Advertisement
Table of Contents
