Working Procedure; Operation Instructions - SPT IM-120B Instruction Manual

■ Operating Procedure
The unit cycles through the following procedures, until water is low or when ice bin is full:
Pumping water - Ice making – Drawing up water - Ice drop down – Water tray returns to normal
position.
■
Operating Instructions
Control panel
1.
A. 'START' and 'STOP' button
When power is connected, unit will enter standby mode (the ice selection indicator
light will flash)
Press the 'START' button to begin operation (the related ice size indicator light
will turn green)
Press the 'STOP' button and unit will return to standby mode.
B. 'ICE SIZE' button
Press this button to select desired cube size. Default is small.
= LARGE cube size indicator (green):
= MEDIUM cube size indicator (green)
= SMALL cube size indicator (green):
C. "ICE FULL" indicator (red):
Indicator lights up when ice storage basket is full. Unit will finish making the
current batch then stop and enter into standby mode. Once ice cubes are
removed, Ice Full indicator light will shut-off and unit will automatically resume.
D. "LOW WATER" indicator (red):
When water level is too low for unit to function, unit will stop working immediately.
Once water is added, indicator light will go off and unit will automatically resume.
- - - - 5 5 5 5 - - - -