Using the flash
Select the flash mode best suited to the light conditions and the effect you
want to achieve.
1
Open the lens barrier fully.
2
í
Press
• The current flash setting is displayed on the
monitor.
3
í
Press
• Each time you press
in the following sequence:
3
"AUTO" – "
flash" – "
4
Press the shutter button halfway.
• When the flash fires, the orange lamp lights steady.
5
Press the shutter button fully to take the picture.
• Flash working range: 0.2 - 3.0 m (0.7 - 9.8 ft)
TIPS
The
T The flash is charging. Wait until the orange lamp goes off.
• The flash does not fire in the movie record mode or during
Panorama shooting.
Note
50
(
).
again to set the flash mode.
í
, the flash mode changes
Red-eye reduction" – "
Flash off".
and orange lamp blink.
Shutter button
Fill-in
P
HQ 2048 x 1536
HQ
í (
)
AUTO