Connecting the camera to a printer
Use the USB cable provided with the camera connect the camera to a
PictBridge-compatible printer.
1
Turn the printer on and plug the printer
end of the USB cable into the printer's
USB port.
• For details of how to turn the printer on and the
position of the USB port, refer to the printer's
instruction manual.
2
Plug the other end of the USB cable into
the camera's USB connector.
• The camera turns on automatically.
• The monitor turns on and the selection screen for
the USB connection is displayed.
3
Ññ
Press
to select PRINT, then
press
.
• ONE MOMENT is displayed and the camera and
printer are connected. The PRINT MODE SELECT
screen is displayed on the monitor. Make the print
settings on the camera's monitor.
~
Go to "Printing pictures" (P. 100).
• If PC is selected in step 3, the PRINT MODE SELECT screen is not
displayed. If the screen is not displayed after several minutes,
Note
remove the USB cable from the camera and start again from step1.
USB connector
USB cable
Connector cover
SELECT
SELEC
GO
8
99