Table of Contents
Advertisement
4.
SSD U
LTRA
4.1. Master and Slave Jumper Settings
Prior to mounting the drive in the system drive bay, the SSD must be configured according to
Figure 4 and Figure 5.
Figure 4: SSD Ultra ATA 2.5" Address Setting by Jumper
Figure 5: SSD Ultra ATA 2.5" Slave Setting by Jumper
4.2. Optional Jumper Setting
The SSD has an optional header located on the back panel that supports the following options:
Secure Erase
Write Protect
The Write Protect jumper may not be modified when the unit is powered on.
15
ATA 2.5" D
RIVE
Product Specification and User Manual
C
ONFIGURATION
SSD (Formerly FFD) Ultra ATA 2.5"
41-PS-0104-00 Rev. 2.3
Advertisement
Table of Contents
