Dometic DTM01E Installation Manual

SANITATION
ACCESSORIES
TANK STATUS
DTM01E
Tank monitor
EN
Installation manual
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
• The installation must comply with all applicable local or national codes, including
the latest edition of the following standards:
U.S.A.
– ANSI/NFPA70, National Electrical Code (NEC)
– American Boat and Yacht Council (ABYC)
Canada
– CSA C22.1, Parts l & ll, Canadian Electrical Code
2 Intended use
The tank monitor is used to prevent damage to the boat by indicating when the
wastewater holding tank is almost full. This tank monitor is only suitable for the
intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and operation
of the tank monitor. Poor installation will result in unsatisfactory performance and a
possible failure. The manufacturer accepts no liability for any injury or damage to the
product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
3 General information
The images used in this document are for reference purposes only. Components and
component locations may vary according to specific product models. Measurements
may vary ±0.38 in. (10 mm).
Included parts
Indicator panel
Mounting frame
Level sensor
#6 fasteners
Service Center & Dealer Locations
Visit: www.dometic.com
Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this
product manual in order to ensure that you install, use, and maintain the product properly at all times. These
instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully
and that you understand and agree to abide by the terms and conditions as set forth herein. You agree to use
this product only for the intended purpose and application and in accordance with the instructions, guidelines,
and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations.
A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and
others, damage to your product, or damage to other property in the vicinity. This product manual, including the
instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For
up-to-date product information, please visit www.dometic.com.
1 Explanation of symbols and safety instructions
This manual has safety information and instructions to help you eliminate or reduce
the risk of accidents and injuries.
1.1 Recognize safety information
This is the safety alert symbol. It is used to alert you to potential physical injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
1.2 Understand signal words
A signal word will identify safety messages and property damage messages, and also
will indicate the degree or level of hazard seriousness.

WARNING
Indicates a hazardous situation that, if not avoided, could result in death or
serious injury.
NOTICE: Used to address practices not related to physical injury.
I
Indicates additional information that is not related to physical injury.
1.3 Supplemental directives
To reduce the risk of accidents and injuries, please observe the following directives
before proceeding to install this product:
• Read and follow all safety information and instructions.
• Read and understand these instructions before installing this product.
3.1 Dimensions
This section provides the dimensions for the indicator panel and level sensor.
q
1 Indicator panel dimensions
2.0 in. (61 mm)
q
3.25 in. (83 mm)
w
2 Level sensor dimensions
Quantity
q 1.53 in. (39 mm)
1
w 1.99 in. (51 mm)
1
1
4
FULL TANK
w
r
0.375 in. (10 mm)
e
2.0 in (51 mm) minimum clearance behind wall
r
w
q
e
e 0.27 in. (7 mm)
e