1. Manuals
  2. Brands
  3. Ballard Designs Manuals
  4. Outdoor Light
  5. Peyton LL331
  6. Assembly instructions

Ballard Designs Peyton LL331 Assembly Instructions

Floor lamp
Hide thumbs
1
2
3

Advertisement

Table of Contents

PRODUCT NAME: Peyton Floor Lamp
ITEM NUMBER: LL331
ASSEMBLED DIMENSIONS: 55"H x 10" Diameter

IMPORTANT SAFETY INSTRUCTIONS:

-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
-For your safety, please read instructions carefully and completely before beginning assembly
or installation.
-Product must be installed according to applicable code(s) by a person familiar with its construction
and operation.
-This Lamp socket rated up to 100 Watt MAX Type A Bulb (not included). LED recommended.
WARNING:
-Deviation from assembly instructions may cause risk of fire or electric shock.
-To reduce risk of personal injury, always turn off fixture and allow bulb to cool prior to
replacement.
-Do not touch or look directly at illuminated bulb.
-Keep flammable material away from illuminated bulb.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED:
3-1-2023
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDIA
Page 1 of 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Peyton LL331 and is the answer not in the manual?

Questions and answers

Related Manuals for Ballard Designs Peyton LL331

Summary of Contents for Ballard Designs Peyton LL331

  • Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Peyton Floor Lamp ITEM NUMBER: LL331 ASSEMBLED DIMENSIONS: 55”H x 10” Diameter IMPORTANT SAFETY INSTRUCTIONS: -This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
  • Page 2 Unplug lamp prior to installation or removal. Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level surface. Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete. Approved Location for Use: Dry Indoor Environment Assembly Time: 10 Minutes HARDWARE AND COMPONENTS...
  • Page 3 Unplug lamp prior to installation or removal. STEP 1: Carefully arrange, turn and tighten Lower Stem (C) to Base (D). Next, insert, turn and tighten Upper Stem (B)/ Finally, turn Socket Assembly (A) onto Upper Stem. Pull excess cord through Base. STEP 2: Add Harp (E) to Saddle.

Table of Contents