Ballard Designs Miles Redd Chinese Vase Outdoor Lamp Assembly

Dimensions of item assembled: 28”h x 16”dia

PRODUCT NAME: MR Chinese Vase Outdoor Lamp

ITEM NUMBER: LO461

DIMENSIONS OF ITEM ASSEMBLED: 28"H x 16"DIA

IMPORTANT SAFETY INSTRUCTIONS:

-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk

of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in

the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an

extension cord unless plug can be fully inserted. Do not alter the plug.

-These Assembly Instructions are provided for your safety. It is important that they are read carefully

and completely before assembling this Lamp.

-This product must be installed with the applicable installation code by a person familiar with the

construction and operation of the product.

-This Lamp has been rated for up to 60 Watt MAX Type A Bulb (NOT Included).

WARNING:

-Deviation from these Assembly Instructions may result in a risk of fire or electric shock.

-To reduce risk of fire, electrical shock, or personal injury, always turn off and unplug Lamp and

allow it to cool prior to replacing the bulb.

-Do not touch the bulb when the Lamp is turned on. Do not look directly at the lit bulb.

-Keep flammable material away from the lit bulb.

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

MADE IN CHINA

Page 1 of 3

Table of Contents

Do you have a question about the Miles Redd Chinese Vase Outdoor Lamp and is the answer not in the manual?

Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: MR Chinese Vase Outdoor Lamp ITEM NUMBER: LO461 DIMENSIONS OF ITEM ASSEMBLED: 28”H x 16”DIA IMPORTANT SAFETY INSTRUCTIONS: -This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
Page 2 NOTE: Remove all parts and hardware from the box along Shade with any plastic protective packaging and carefully lay all the parts out on a clean, flat surface. DO NOT discard any contents until after assembly and installation is complete to avoid accidentally discarding small parts or hardware.
Page 3 NOTE: Before starting assembly of this Lamp, be sure it has been unplugged. Turning the switch off is not sufficient enough. STEP 1: Screw in Bulb. This Lamp has been rated for up to a 60 Watt MAX Type A Bulb (NOT Included).

Lo461