Fx Emulation Menu - Oki C3600n User Manual

FX Emulation menu

This menu controls the settings that are in effect when the
printer is operating in FX emulation mode.
FX EMULATION MENU
ITEM
CHARACTER
PITCH
CHARACTER
SET
SYMBOL SET
LETTER 0 STYLE DISABLE
ZERO
CHARACTER
LINE PITCH
WHITE PAGE
SKIP
CR FUNCTION
(Carriage
Return)
LINE LENGTH
FORM LENGTH
TOF POSITION
(Top of Form)
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
SETTINGS
10 CPI;
12 CPI; 17 CPI;
20 CPI;
PROPORTIONAL
Set 1
Set 2
IBM 437
(Default Symbol
Set only shown)
ENABLE
NORMAL
SLASHED
6 LPI
8 LPI
OFF
ON
CR
CR+LF
80 COLUMN
136 COLUMN
11 inch
11.7 inch
12 inch
0.0 inch -
1.0 inch
0.0 inch -
1.0 inch
DISABLE
ENABLE
SAME
DIFF
C3600n User's Guide
EXPLANATION
Specifies character pitch in this
emulation.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH
with the letter o and 9DH with a
zero.
Sets the zero to be slashed or un-
slashed.
Specifies the line spacing.
Selects whether blank pages are
printed or not.
Selects whether a received carriage
return character (0Dh) also causes a
line feed.
Specifies the number of characters
per line.
Specifies the length of the paper.
Specifies the distance at which
printing starts, from the top edge of
the paper.
Specifies the distance at which
printing starts, from the left-hand
edge of the paper.
Sets the printing mode that can fit
print data, equivalent to 11 inches
(66 lines), in the LETTER-size
printable area.
Sets the character height:
SAME: Regardless of CPI, same
height. DIFF: As CPI, character
heights vary.
71