Pcl Emulation Menu - Oki C3600n User Manual

PCL Emulation menu

This menu controls the settings that are in effect when the
printer is operating in PCL emulation mode.
PCL EMULATION MENU
ITEM
FONT SOURCE
FONT No.
FONT PITCH
SYMBOL SET
A4 PRINT
WIDTH
WHITE PAGE
SKIP
CR FUNCTION
(Carriage
Return)
LF FUNCTION
(Line Feed)
PRINT MARGIN
SETTINGS
RESIDENT /
RESIDENT2
DOWNLOADED
I0 / C001 /
S001
0.44CPI~
10.00CPI~
99.99CPI
PC-8
(Default Symbol
Set only shown)
78 COLUMN
80 COLUMN
OFF
ON
CR
CR+LF
LF
LF+CR
NORMAL
1/5 INCH
1/6 INCH
C3600n User's Guide
EXPLANATION
Specifies the location of the PCL
default font. Normally this will be
INTERNAL unless additional fonts
are installed in the expansion ROM
slot or additional fonts have been
downloaded to RAM as permanent
fonts.
Sets the current default font number
from the currently selected source,
which could be internal (I), ROM slot
(C) or downloaded (S).
Sets the width of the PCL default
font in characters/inch (CPI).
Default font is the fixed-pitch,
scalable font. The value is displayed
to the second decimal place
Displayed only when the font
selected in Font No. is fixed-spacing,
scalable font.
PCL symbol set. If the font source
and number are changed to one
which does not support the selected
symbol set, this must be changed to
an available symbol set for that font.
Sets the number of columns subject
to Auto LF with A4 paper in PCL.
This is the value when Auto CR/LF
Mode is set to OFF with the 10CPI
character.
Selects whether blank pages are
printed or not.
Selects whether a received carriage
return character (0Dh) also causes a
line feed.
Selects whether a received line feed
character (0Ah) also causes a
carriage return.
Sets the non-printable page area.
NORMAL is PCL-compatible.
67