When Moving The Printer - Oki B720dn User Manual

4. Turn the short tab (1) of the feed roller to the right and slowly push it onto the shaft
of the paper tray.
By aligning the slot of the feed
that the short tab fits into the slot of the shaft.
5. Push the paper tray completely into the printer.
W M
HEN OVING THE
Carry out the following procedure when moving the printer.
> The machine, without the optional accessories, paper trays,
consumables and paper, weighs 18.8kg. When moving the
equipment, make sure that there are two or more persons
carrying it.
> If the duplex unit (optional) or A4 universal tray (optional) has
been installed, uninstall it before moving the printer. If these are
not fixed securely to the printer, they may fall to the ground and
cause injuries.
> When lifting the machine, be sure to observe the following
points, failure to do so may cause the machine to fall and result
in injuries.
> 2 persons, one facing the front of the machine (control panel)
and the other facing the back, should firmly grip the recessed
areas on the bottom part of both sides of the machine. Never
try to lift the machine by gripping any other areas.
> Bend your knees to avoid possible injuries to your back.
Do not tilt the machine more than 10 degrees.
roller
with that of the shaft, push the feed roll completely in so
P
RINTER
WARNING!
CAUTION!
Daily Care > 46