Table of Contents
Advertisement
Chapter 5
Connecting Your Mobile Internet PC to a Network
Your Compaq Internet PC may be equipped with a 10/100 Mbps network interface
adapter and driver. Refer to the Compaq Hardware and Software Setup poster for
the exact location of the Ethernet connector.
Setting Up a Network
You must physically connect the computers, install the network protocols, and
enable file and print sharing.
Hardware Requirements
To physically connect computers, you must have the following:
at least two computers with RJ-45 Ethernet connectors
one 10BaseT or 100BaseT hub
one Category 5 Ethernet cable per computer
Hardware Installation
Connect the computers by inserting the cable into the Ethernet connectors on each
computer. Refer to the hub manufacturer documentation for instructions on
connecting the cables to the hub.
Connecting Your Mobile Internet PC to a Network
5-1
Advertisement
Table of Contents
