Storage; Troubleshooting; Technical Data - Gardena EasyClean Li Operator's Manual

5. STORAGE

To put into storage:
The product must be stored away from children.
1. Charge the battery.
2. Clean the vacuum cleaner and the charging power
supply (see 4. MAINTENANCE).
3. Store the vacuum cleaner and the charging power
supply in a dry, enclosed and frost-free place.

6. TROUBLESHOOTING

Wait for the engine to stop before you
troubleshoot the product.
Problem
Vacuum cleaner vacuums poorly
Suction material falls out of
the suction opening
Vacuum cleaner does not start
Charging station is mounted on
the wall – vacuum cleaner is not
charging
Charging control lamp (Lc)
the charging power supply does
not illuminate
Charging control lamp (Lc)
the charger flashes red
NOTE: For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers approved
by GARDENA.

7. TECHNICAL DATA

Handheld Battery Vacuum Cleaner
Rated current
Suction power
Weight
Sound pressure level * L
Uncertainty k
PA
Possible Cause
Debris container is full.
Filter is dirty.
Rubber valve of the debris container
is blocked e.g. by small branches or
leaves.
Rubber valve is no longer centered in
the debris container holder.
Vacuum cleaner was just discon-
nected from the charger socket.
Nozzle was not removed from
vacuum cleaner.
on Charging power supply is not
plugged in correctly.
on Battery temperature is out of range.
Unit Value (Art. 9339)
A 8
l/min. 1500
kg 1.3
80
1)
dB (A)
PA
3
Disposal:
(in accordance with RL2012/19/EC)
The product must not be disposed of to normal
household waste. It must be disposed of in line
with local environmental regulations.
The GARDENA battery contains lithium-
ion cells that should not be disposed of
with normal household waste at the end
of its life.
IMPORTANT!
Dispose of the product through or via your municipal
recycling collection centre.
Remedy
v Empty the debris container.
v Clean the filter.
v Remove blocking suction material
from the rubber valve.
v Loosen the screw of the valve, cent-
er it and tighten the screw again.
v Wait approx. 4 Sec. after discon-
necting from the charger socket.
v Remove the nozzle for charching.
v Plug the charging power supply into
a wall outlet.
v Use the battery in surroundings
where temperatures are between
0 °C and 40 °C.
Value (Art. 9340)
8
1500
1.3
80
3
Li-ion
15