Page 2
At Magnasonic, our mission is a simple one – create people-driven products that make life’s daily adventures easier and more fun. We believe everyday experiences should be extraordinary.
Formatting Your SD Card ......................11 Scanning Your Images ........................11 Viewing Your Scanned Images ....................12 Transferring Images to Your Computer ................12 Watching Saved Images from a TV Screen................12 FAQ / Troubleshooting.........................13 Specifications ............................15 FCC Information .............................15 HDMI Information ..........................16 Magnasonic® Warranty ........................16...
What’s Included Film Scanner USB Cable Cleaning Brush User Manual Negative Adapter Slide Adapter 110 Slide Insert 110 Negative Insert Super 8/8mm Insert...
Product Information Front Settings Button Gallery Button OK/Image Power Button Settings Button Back/Flip Button Forward/Mirror Button Capture Button Slide/Negative Adapter Slot LCD Screen Back SD Card Slot HDMI Port USB C Port HDMI...
Operating Instructions Powering on Your Film Scanner 1. Connect the USB cable to the USB port on the film scanner. 2. Connect the other end of the USB cable into a USB wall adapter (not included) or USB power source (5V 1A). 3.
Prepping Your Film/Slides 1. Open the appropriate slide/film adapter and insert your slide/film. Each adapter is labelled to identify it. If you are not certain of your slide/film type, refer to the Slide Type and Film Type images below. 2. Ensure the slide/film is facing the correct way and is not bent. 3.
Page 8
110 Slide Film Types 8mm/Super 8 film types are under Slides in the Film Type menu and require the Negative Adapter for scanning. Super 8 Film Adapters Super 8...
Preparing the Film Scanner 1. Press and hold the Power button on the scanner to turn it on. 2. Insert the prepared film or slide adapter into the slot on the right side of the film scanner. 3. In the Main Menu use the arrow keys to highlight the FILM TYPE option and press the OK button to select it.
6. Once ready, press the SCAN button to capture and save your image to the internal memory or SD card if one is inserted. The FS70 cannot scan directly to a computer. 7. If you have multiple slides/negatives you can push/pull them through the adapter without removing it.
Viewing Your Scanned Images 1. To view your saved images, press the GALLERY button. 2. Your images will play automatically in Slideshow mode. 3. To manually review your saved images and stop Slideshow mode, press the OK button. 4. Use the left and right buttons to scroll through each saved image. 5.
FAQ / Troubleshooting Issue Solution Ensure the film/slides are clean and that you clean the inside of the scanner with the How can I get the best quality included cleaning brush immediately before scan possible? scanning. See pg. 10 for instructions on how to use the cleaning brush.
Page 14
Issue Solution Can I use this to scan raw film or do I need to develop the The scanner will work for developed film only. negatives first? If an SD Card is inserted your computer will I cannot see all my images on the only see images saved on the SD Card.
Specifications Image Sensor 13 Mega CMOS sensor 35mm/126/110/Super 8 film & 135/126/110 slides Supported Film Type *Note: This film scanner does not support 127/120/220 slides or 116/127 film Resolution 13 Megapixels/25 Megapixels (interpolation) Picture Aspect Ratio Internal Memory 64MB External Memory Card SD card up to 128GB Power Input DC 5V 1A...
Magnasonic has outstanding quality control; if something should go wrong with any of our products, we will repair it free of charge within the warranty period. If the product cannot be repaired, we will replace the product. In the event that Magnasonic replaces a product under warranty, the replacement would only carry the original warranty from the original date of purchase.