CyberPowerPC Tracer Liquid Cooling Box Service Manual page 5

5
Operate your Liquid Cooling Box
1.Plug in the power cord to the power socket.
2.Turn on the laptop and make sure the Bluetooth is turned on as well.
3.Press the power button on the Liquid Cooling Box and the LED
indicator will start glowing.
4.Open the application "Control Center", click "Performance" then
"Liquid Cooling System Control" module, the application will pop up
"Helper Manual".
5.After selecting "Device" and Click "connect" button then Liquid Cooling
Box and the laptop will pair via Bluetooth (the fan and water pump
are then activated).
6.Check all ports for leakage after five minutes, if there is, turn off the
power and reconnect the port.
7.The water level drops in standard operation, please add distilled
water and make sure the water level is above the marker indicator
(note. please reference 4-3).
Liquid Cooling Box and laptop will pair automatically via Bluetooth after first pairing:
a, if both are in Bluetooth distance
b, laptop has Control Center installed