Operating The Ignition (Turn Type) - ZENNE KGS Series Operating Instructions Manual

OPERATING THE IGNITION (TURN TYPE)

TURNING ON
1.
THE GAS COOKER
•
Gas cookers without SAFETY SENSOR:
i. Push in the ignition knob fully.
ii. Turn anti-clockwise towards
[ON]
the position.
• Gas cookers with SAFETY SENSOR:
i. Push and turn anti-clockwise
[ON]
towards the
position.
(hold down for 5 seconds)
•
Release the knob and check if the
flame has been ignited. If no flame is
detected, turn the knob to
position and repeat the above steps.
•
When the burner has been ignited,
adjust the knob to achieve the
desired flame intensity.
Note:
It will take longer for ignition to occur
if the gas cooker has not been used
for installed for a long period of time.
2.
• Small Burner Cap
& Main Burner
• Small Burner Cap
& BurnerCap
• Small Burner Cap
& Burner Cap
•
Small Burner Cap
•
Burner Cap:
[OFF]
• Small Burner Cap:
• Burner Cap:
• Lowest flame setting.
CAUTION :
!
CONTROLLING
THE FLAME
MEDIUM TO HIGH
:
OR HIGHEST FLAME
LOW TO MEDIUM
:
OR MEDIUM FLAME
LOW TO NO
:
OR NO FLAME
: MEDIUM FLAME
LOW FLAME
LOW FLAME
NO FLAME
Flame intensity will not
accurately match illustrations
on the flame indicator.
8
TURNING OFF
3.
THE GAS COOKER
No
Flame
Zone
• Turn the ignition knob clockwise
[OFF]
towards the position.
You will then hear a 'CLICK' sound.
This is a signal that the gas cooker
has been correctly turned off.
NOTE :
Sometimes, a "POP" sound can
be heard when the burner is
turned off. This is normal.
LEGEND :
Small Burner
Burner Cap Cap
Low Flame
Medium Flame
High Flame