Table of Contents
Advertisement
Quick Links
RTS 1S9 TEXACO FAN PLATFORM NURBURGRING
CONGRATULATIONS
Congratulations in choosing a unique product to enhance your slot car track
diorama. This can truly be described as a product born from a love for slot cars.
Buying this product have made you a member of a very special family, yes you are
not dealing with a faceless business, but rather a family of slot car fanatics.
We have put hours of skill and more importantly love into this product and it is
wonderful to share our love for slot cars with you. May you enjoy the build and have
years of joy having it as part of your trackside diorama.
This product is inspired by the TEXACO Fan Platform at the Nürburgring during the
golden years of racing. This is as close to a replica in terms of design and branding
as could be realistically achieved from available photos of the original structure at the
time.
WARRANTY
This product is covered by a comprehensive money-back warranty to ensure your
absolute satisfaction with your purchase.
WHO ARE WE?
This product is brought to you by racetrackscenics.com. If you have not done so
already, please visit our website today. You are also most welcome to visit the
Facebook pages
"Race Track Scenics Slot Car Scenery" and "Johan Malan" to
keep up to date with the latest developments and the launching of exciting new
products that may be in the pipeline.
You can contact Kevin Sharpe on
Email: racetrackscenics@gmail.com
Text in the USA 586 549 2879
WhatsApp 1-586-549-2879
for any assistance that you might require. Your feedback and a photo or two of your
trackside addition will really be appreciated. We love to share in your joy!
ASSEMBLY INSTRUCTIONS
1
Advertisement
Table of Contents
Related Manuals for RACE TRACK SCENICS 1S9
Summary of Contents for RACE TRACK SCENICS 1S9
- Page 1 You are also most welcome to visit the Facebook pages “Race Track Scenics Slot Car Scenery” and “Johan Malan” to keep up to date with the latest developments and the launching of exciting new products that may be in the pipeline.
- Page 2 WHAT IS IN THE KIT? In this kit you will find all the laser cut pieced needed to assemble this product. The pieces are still intact in the sheets as they were cut to ensure that all the parts are there.
- Page 3 FAMILIARIZE YOURSELF Have a look at the photos of the finished product.
- Page 4 Now have a look at the next diagram where all the laser cut parts are shown and numbered from A to L and try to identify which is which and where they fit in. The structure consists of two sides (A 1-2) that support the floor (B) and which is connected higher up by a ring beam (C).
- Page 5 We recommend that you start by sanding your finished product with a very light sandpaper to ensure a smooth finish for the end product. WORD OF ADVICE We would strongly advise you to do a quick dry assembly before you start gluing the laser cut parts together.
- Page 6 LET’S GET STARTED WITH THE ASSEMBLY The assembly of this structure is really easy and should not take too long. Let’s start by putting the one side (A1) on your worksurface. The orientation as in the diagram above should be achieved. Now glue in the nubs of the floor (B) and the ring beam (C) into the slots of the side.
- Page 7 CONCLUSION We sincerely hoped you have enjoyed this assembly and finishing. Please remember to give us some feedback and either send or post some pictures of this product on your track.
Need help?
Do you have a question about the 1S9 and is the answer not in the manual?
Questions and answers