Table of Contents
Advertisement
POWER
STAND BY
Essentia Front Panel
1. POWER Button:
The amplifier is designed to be turned on and remain on. The power button supplies power to the system. Each
zone can then be turned on or off independently. The amplifier should be turned on before any external
connections are made. This activates internal protective circuitry.
2. STAND BY LED:
When lit, this blue LED (light-emitting diode) indicates that the amplifier is plugged into an AC power outlet
source.
3. Zone Status LED's:
These LED's indicate the power status of each zone. When a zone LED is lit, it indicates that the zone is
currently turned on.
Keypad Features
1. Volume Level
The level of the zone volume is indicated by these LEDs (light-emitting diodes).
2. Power
The power button turns that keypad's zone on and off independently of the other zones. Pressing and holding
the power button turns all zones off simultaneously.
3. Volume
Independent audio volume level for each zone is controlled with these buttons.
4. IR Receiver
Each keypad has an IR (infrared) receiver located under the volume button for wireless control of the audio
source equipment.
5. Mute
The mute button temporarily silences any audio playing in that keypad's zone.
6. Source Selection
The source buttons independently select any of the six sources connected to the Essentia amplifier.
The selected source button will remain lit.
ZONE 1
ZONE 2
ZONE 3
ZONE 4
1
VOLUME
2
TNR1
TNR2
6
SAT 1
4
ZONE 5
ZONE 6
3
MUTE
4
CD
HD
5
SAT2
V.II
Hide quick links:
Advertisement
Table of Contents
