Essentia
Amplifier Front Panel
POWER
STAND BY
1 2
1.
POWER Button:
2.
STAND BY LED:
3.
Zone Status LED's:
ZONE 1
ZONE 2
ZONE 3
ZONE 4
3
The amplifier is designed to be turned on and remain on. The power button
supplies power to the system. Each zone can then be turned on or off
independently. The amplifier should be turned on before any external connec-
tions are made. This activates internal protective circuitry. With all the zones
turned off the resulting "standby" power consumption is extremely low.
This blue LED (light-emitting diode) will indicate that the amplifier is plugged
in to an AC outlet source.
These LED's indicate the power status of each zone. When a zone LED is lit,
that zone is currently turned on.
ZONE 5
ZONE 6
8