Case CX225SR Repair Manual page 30

DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
Arm closing
Bucket opening
Bucket closing
Control valve
Five-section control valve for dipper, boom acceleration, swing, option and right travel.
Four-section control valve for dipper acceleration, bucket, boom and left travel.
Load holding relief valve for boom and dipper.
Swing motor
Fixed ow motor with axial pistons.
Automatic disk brakes.
Chassis upperstructure swing speed
Displacement
Working ow
Reduction ratio
Braking torque
Minimum brake release pressure
Acceptable motor leakage
Travel motor
Two-speed motor with axial pistons.
Automatic disk brakes.
Slow speed
High speed
Gradeability
Tractive effort
Displacement
Working ow
Reduction ratio
Braking torque (excluding reduction gear)
Permissible deviation in travel over a distance of 20 m (full speed)
Acceptable motor leakage
Attachment
Breakout force
Breakout force (dipper 3 m)
26020 1 02/12/2004
A.10.A / 6
3.7+/-0.6 s
2.3+/-0.6 s
4+/-0.6 s
11.2 RPM
151 cm³
155 L/min
16.757
857 Nm
32 bar
16 L/min
3.1 km/h
5 km/h
70 % (35°)
19 100 daN
168.9 cm³
100.3 cm³
212 L/min
43.246
483 Nm
1 m
13 L/min
13000 daN
9530 daN