Consumables ( - A.92.A.55)
CX225SR
FLUIDS AND LUBRICANTS
Lubricants must have the correct properties for each application.
ATTENTION: You must respect the operating conditions for the different ingredients.
Hydraulic uid
CASE AKCELA hydraulic uid is specially designed for high pressure applications and for the CASE hydraulic
system.
The type of uid to be used depends on the ambient temperature.
TEMPERATE COUNTRIES - 20 °C to + 40 °C
•
CASE AKCELA HYDRAULIC EXCAVATOR FLUID
(MS 1230. ISO VG 46. DIN 51524 PART 2 HV)
HOT COUNTRIES 0 °C to + 60 °C
•
CASE AKCELA HYDRAULIC EXCAVATOR FLUID "HOT CLIMATE"
(MS 1230. ISO VG 100. DIN 51524 PART 2 HV)
COLD COUNTRIES - 40 °C to + 20 °C
•
CASE AKCELA HYDRAULIC EXCAVATOR FLUID "COLD CLIMATE"
(MS 1230. ISO VG 22. DIN 51524 PART 2 HV)
BIODEGRADABLE FLUID - 30 - +40 °C
•
This yellow uid can be mixed with standard uid.
If this liquid is used, it is advisable to completely drain the hydraulic circuit .
CASE AKCELA HYDRAULIC EXCAVATORS FLUID BIO
(MS 1230. ISO VG 46. DIN 51524 PART 2 HV)
Transmission component oil
Extreme pressure oil used in transmission components inside sealed housings.
CASE AKCELA 135H EP GEAR LUBE SAE 80W-90
(SAE 80W-90. API GL 5. MIL-L-2105 D. MS 1316. ZF TE-ML 05A)
Grease
"Extreme Pressure" multi-purpose grease
CASE AKCELA MOLY GREASE 241H EP-M (251H EP-M NLGI2)
•
with lithium and molybdenum bisulphide soap.
CASE AKCELA 251H EP MULTI-PURPOSE GREASE (251H EP. NLGI 2)
•
with lithium and calcium soap.
CASE AKCELA PREMIUM GREASE EP-2 (NLGI 2)
•
with lithium soap.
HYDRAULIC HAMMERS
Use only CASE AKCELA PREMIUM GREASE EP-2 (NLGI 2) grease with lithium soap.
Engine oil
CASE AKCELA NO. 1 ENGINE OIL is recommended for the engine.
This oil provides correct lubrication for your engine in all working conditions.
If CASE AKCELA NO. 1 ENGINE OIL Multigrade cannot be obtained, use oil corresponding to one of the following
categories: ACEA E5. MS 1121. API CH-4.
INTRODUCTION
9-40691 1 02/12/2004
13